1. <tbody id="qadtb"></tbody>
    <th id="qadtb"></th>

    1. <th id="qadtb"></th>

      The reason why the PE water supply pipe will burst

      2022-08-19 09:28:27

      The reason why the PE water supply pipe will burst

      Summary :

      Everyone knows that PE water supply pipes can be used for water delivery projects. Although the PE water supply pipe itself has excellent characteristics, due to the interference of various elements in the new project, the PE water supply pipe will also crack. The reasons for the cracking will be described in detail below.

      The reason why the PE water supply pipe will burst

      Everyone knows that PE water supply pipes can be used for water delivery projects. Although the PE water supply pipe itself has excellent characteristics, due to the interference of various elements in the new project, the PE water supply pipe will also crack. The reasons for the cracking will be described in detail below.

      The reason for the bursting of the PE water supply pipe is the cracking of the hot-melt joint. The length of the pipe is relatively limited, so a welding process is required to weld pipes of different lengths in a water conveyance project. If the main parameters used in welding do not conform to the specific main parameters of the pipeline, or if the actual welding operation of the worker is not timely, it is very likely that the hot-melt joint of the PE water supply pipe will crack.

      There is no problem with the thermal fusion joint of the PE water supply pipe, but the pipe body of the PE water supply pipe is cracked, and a pressure test or pipeline quality inspection should be carried out. If the results of the pressure test are within the specification, it is a product quality problem with the pipeline itself, such as brittle cracking or plastic cracking at the fracture.

      hdpe water pipe 7.JPG

      Interference of temperature on the quality of PE water supply pipes: Temperature is the main factor that interferes with the plasticization and production of plastic pipes. If the temperature is too low, the actual effect of plasticization is not very good, and if the temperature is too high, the raw materials are very easy to decompose. Temperature control should be based on the initial recipe, extruder and die structure, screw speed and other factors. In the production and processing of rigid PVC pipes, because the production and processing temperature is close to the decomposition temperature, the raw material temperature at each point should be strictly controlled in the production process. In addition, pay attention to the deviation of the thermometer and the location of the measurement point.

      The interference of screw speed on the quality of PE water supply pipe: the selection of screw speed directly interferes with the production volume and quality. The screw speed depends on the size of the extruder and the size of the upper tube diameter. However, the waiting time of the raw material in the screw is short, and the high frictional heat makes the inner wall of the tube not smooth and the compressive strength of the tube is reduced.

      No matter what the sudden reason is, it is an indisputable fact that the PE water supply pipe bursts. Construction companies need to respond quickly based on many years of work experience and above analysis to reduce losses and ensure the quality of construction.

      What are the design requirements for PE pipes?

      PE pipe has comprehensive advantages such as safety, environmental sanitation, convenient construction and long service life, and has long become an ideal pipe for urban water supply. Practically understand the design requirements of PE pipes:

      1. Because of the rigidity and linear expansion coefficient of the pe pipe, when fully considering the compressive strength problem, it is necessary to increase the total number of supporting points to ensure the rigidity of the water supply pipe network; when fully considering the linear expansion coefficient, be sure to fully consider The laying of long-distance pipelines must have the necessary amount of expansion and contraction.

      2. The laying depth of the PE pipe is determined by the freezing level, the external load and the intersection of other pipes and other factors. Under normal conditions, the laying depth can be 0.2 meters below the freezing line, and when the pipe diameter exceeds 110mm, the top buried depth of the pipe is 1.0 meters.

      pe-water-pipe.JPG

      3. The bottom of the trench is usually the outer diameter of the pipe plus 0.4 meters, the side of the trench should be a straight line, the bottom of the trench should be a flat surface, and there should be no protrusions, gravel or other hard blocks in the trench. When digging trenches with machinery, a soil layer with a thickness of 0.2 to 0.3 meters should be left at the bottom of the trench and not excavated for the time being. It is reasonable to use manpower to clean the bottom of the trench to the elevation.

      4. When the pipeline is laid, the top of the pipe shall be backfilled with 20cm of medium and coarse sand, and the bottom of the pipe shall be made of 15cm of sand cushion.

      PE pipe is one of the more common types in China's pipe market. At this stage, plastic pipes have developed vigorously, and PE pipes, PP-R pipes, and UPVC pipes have all taken a foothold. Among them, the strong development potential of PE pipes has attracted worldwide attention.


      Send a Message

      If you want to ask anything just fill in the form below and send us.

      // News //

      Our News

      HDPE water supply pipe or PPR water supply pipe?
      HDPE water supply pipe or PPR water supply pipe?

      09/06/2022

      With the development of the times, in the field of water supply and drainage, plastic pipes have gra...

      Why do we say that PPR pipe is the best choice for hot water pipe application?
      Why do we say that PPR pipe is the best choice for hot water pipe application?

      08/31/2022

      As one of the most commonly used pipes in modern home decoration, PPR water pipes are used by most p...

      How to choose the correct water supply pipe and drainage pipe
      How to choose the correct water supply pipe and drainage pipe

      08/24/2022

      With the continuous development and progress of science and technology, the replacement of pipes in ...

      The reason why the PE water supply pipe will burst
      The reason why the PE water supply pipe will burst

      08/19/2022

      Everyone knows that PE water supply pipes can be used for water delivery projects. Although the PE w...

      Preparation before construction of PE pipe trench
      Preparation before construction of PE pipe trench

      08/18/2022

      Before excavation, firstly grasp the condition of the underground pipeline along the pipeline surfac...

      6 Important Points about HDPE Gas Pipe
      6 Important Points about HDPE Gas Pipe

      08/17/2022

      HDPE gas pipe is a very common and widely used gas pipe. What important points do we need to pay att...

      // Our Products //

      New Products

      Automatic butt fusion hot melt machine for Arabia
      Automatic butt fusion hot melt machine for Arabia

      The butt fusion machine 630-800mm is a powerful welding equipment designed to weld and braze pipes, ...

      Plastic pipe butt fusion machine China for sale
      Plastic pipe butt fusion machine China for sale

      This butt fusion machine is equipped with continuous pressure circulation, pressure control and temp...

      Large Diameter Butt Fusion Welding Machine 630-800mm
      Large Diameter Butt Fusion Welding Machine 630-800mm

      The Butt Fusion machine 630-800mm has been designed with the perfect solution for butt fusion. The p...

      PPR welder socket fusion head price list
      PPR welder socket fusion head price list

      Plastic pipe welder with thermostat heating plate is used for socket butt fusion welding pipes and f...

      Socket fusion machine welding head Teflon material for sale
      Socket fusion machine welding head Teflon material for sale

      Socket fusion machine welding head is the ideal choice for your home and work. It's easy to use and ...

      Digital plastic pipe PPR welder socket fusion machine for India
      Digital plastic pipe PPR welder socket fusion machine for India

      The socket fusion machine is used for welding PE / PP / PPR pipes and fittings. This machine is easy...

      Butt Fusion Fuser 16-63 mm welding equipment
      Butt Fusion Fuser 16-63 mm welding equipment

      With the flexibility of a digital control system, the machine can easily handle different plastic pi...

      UPVC irrigation agricultural water pipe for Australia
      UPVC irrigation agricultural water pipe for Australia

      UPVC low pressure irrigation pipe have a long service life the anti-aging performance, the HAILI PVC...

      A级毛片免费观看在线网站,A级毛片免费全部播放,免费A级毛片无码免费视频120S
      1. <tbody id="qadtb"></tbody>
        <th id="qadtb"></th>

        1. <th id="qadtb"></th>

          <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>