1. <tbody id="qadtb"></tbody>
    <th id="qadtb"></th>

    1. <th id="qadtb"></th>

      Portable Butt Fusion Machine 20mm-63mm for PE,PPR,PP Welding

      Portable Butt Fusion Machine 20mm-63mm for PE,PPR,PP Welding
      Portable Butt Fusion Machine 20mm-63mm for PE,PPR,PP Welding
      Portable Butt Fusion Machine 20mm-63mm for PE,PPR,PP Welding
      Portable Butt Fusion Machine 20mm-63mm for PE,PPR,PP Welding
      Portable Butt Fusion Machine 20mm-63mm for PE,PPR,PP Welding
      Name
      Butt Fusion Machine 20mm-63mm
      Place of Origin
      China
      Standard
      ASTM F 1056
      Price
      35USD
      Payment items
      T/T L/C
      Port
      Qingdao
      Payment
      30% ADVANCE PAYMENT AND THE 70% BALANCE PAYMENT BEFORE THE SHIPEMNT
      "HAILI" fusion machine comes in handy in tight spaces due to its narrow profile
      Heater adapters are manufactured in accordance with ASTM F 1056 and are coated with stick-resistant material

      Power Supply Voltage

      220V-380V

      Weight (KG)

      12.15 KG

      Output Voltage

      21.2V-31.2V

      Heating Plate Power

      800W, 1000w, 1300w

      Welding Range

      20mm-63mm

      butt-fusion.jpg

      Application and features: 

      1. Suitable for butt fusion welding pipes and fittings made of PE or PP

      2.Pre-programmed welding parameter enable to choose the heating time in putting out diameter of pipes to be welded.   

       butt-fusion-machine-20-63.jpg

      "HAILI" fusion machine comes with an 130 Watt, 120 VAC heating element and 13' power cable
      "HAILI" fusion machine has an ergonomic plastic handle and a slide-in stand for stability
      The thermostat control dial is infinitely adjustable for temperatures of up to 570 F
      "HAILI" fusion machine comes in handy in tight spaces due to its narrow profile
      Heater adapters are manufactured in accordance with ASTM F 1056 and are coated with stick-resistant material

      How to use the HAILI portable fusion machine

      pic_001.jpg

      1. Heating temperature and time

      The welding temperature should be controlled at 260-270 ℃. When the temperature is too low, the heat fusion of the PPR pipe is not in place, and the pipe and the pipe fittings cannot be well welded. When the temperature is too high, the PPR tube melts too much, which is easy to cause blockage at the joint of the tube or the tube hole is too small to affect the flow. And PPR will become thin and soft and remain on the die, and carbonization will occur under long-term high temperature, which will affect the service life of the die.

      Due to the importance of temperature, welding equipment needs to have a good temperature control system. If the temperature control system is not good, the temperature of some welding equipment will be heated to more than 300 degrees, and it is easy to cause welding quality problems when the temperature is too high. .

      The heating time is related to the diameter of the PPR tube. For a tube with an outer diameter of 20mm, the heating time is 5s, and for a tube with an outer diameter of 25mm, the heating time is 7s. Too short or too long time will affect the welding quality of PPR pipe.

      圖片1.png

      2. Welding depth

      The welding depth is related to the outer diameter of the PPR pipe. For a pipe with an outer diameter of 20mm, the minimum welding depth is 14mm, and for a pipe with an outer diameter of 25mm, the minimum welding depth is 15mm.

      When the welding depth is too shallow, the welding area is not enough, and the water pipe is not firmly bonded. When the welding depth is too deep, the excess part will be squeezed inside the pipe fitting, reducing the inner diameter of the water pipe at the squeezed part, resulting in a reduction in the water flow of the water pipe, and even lead to welding blockage. Also, be careful not to attempt to turn the tubing and fittings while inserting them.

      3. Whether the die head is worn

      There is a layer of coating containing Teflon on the die head of the welding machine. Teflon is a difficult-to-stick material. Most of the glues on the market have no bonding effect on it. It can effectively prevent PPR from remaining during welding. on the die. The quality of the die is good or bad, but the die must be kept clean. It is worth noting that Teflon will wear out after a long time, and the anti-stick properties of the die head will be affected to a certain extent after wear and tear. At this time, the die head needs to be replaced, otherwise the welding of the PPR tube will lead to detachment. Welding hazard.

      WPS圖片(4).jpg

      4. PPR raw materials are good or bad

      The quality of the raw material of the water pipe will affect the ease of welding of the water pipe. I believe that experienced plumbers know it well. 260-270°C is the welding temperature of PPR, which means that the material of PPR melts sufficiently at this temperature and is easy to weld. Here are two popular concepts, melting range and melting finger. For polymer materials, the melting temperature is a range, that is, the melting range (initial melting - final melting), and the flow properties after melting can be expressed by the melting index. How do these two parameters affect welding? It can be simply understood that the initial melting point is low, the material will melt faster, and the higher the melting index, the thinner the material will be after melting. These two characteristics directly affect the operation time of PPR tube welding.

      The key technology of PPR raw material is here. The two parameters of HAILI PPR raw material are better controlled, and the pipeline is easier to weld. The melting range and melting index of PPR raw materials doped with impurities will become larger, which will ultimately affect the ease of welding of PPR pipes.

      In summary, PP, PPR water pipe welding needs to pay attention to:

      Choose a good water pipe that is easier to weld;

      Select welding equipment with accurate temperature control to ensure that the temperature is controlled at 260-270 °C;

      Ensure that the welding die head is clean and needs to be cleaned and replaced regularly;

      Master the welding depth and avoid too shallow or too deep sockets;

      Master the welding time, avoid too long and too short;

      Before welding, be sure to check whether the water pipe has been damaged, and clean the parts to be welded;





      Send a Message

      If you want to ask anything just fill in the form below and send us.

      Name: Omari        time:2022-08-30 10:10:56
      I was surprised by the quality of the butt fusion machine saw for the price paid.

      Name: Robert JImi        time:2022-08-17 11:42:28
      Portable Butt Fusion Machine is good.

      Write a review

      // Our Pipe //

      Featured Pipe Products

      PE butt fusion hydraulic welding machine for Brazil
      PE butt fusion hydraulic welding machine for Brazil

      The butt fusion operation is to heat the two pipe end faces to a certain temperature, and then apply...

      Portable Butt Fusion Machine 20mm-63mm for PE,PPR,PP Welding
      Portable Butt Fusion Machine 20mm-63mm for PE,PPR,PP Welding

      "HAILI" fusion machine comes in handy in tight spaces due to its narrow profile
      Heater adapters are...

      DN 20-32mm Butt Fusion portable Welding Machine Equipment for PP,PPR,PE
      DN 20-32mm Butt Fusion portable Welding Machine Equipment for PP,PPR,PE

      Heater adapters are manufactured in accordance with ASTM F 1056 and are coated with stick-resistant ...

      // Our Pipe //

      New Fusion Machine

      PE butt fusion hydraulic welding machine for Brazil
      PE butt fusion hydraulic welding machine for Brazil

      The butt fusion operation is to heat the two pipe end faces to a certain temperature, and then apply...

      Portable Butt Fusion Machine 20mm-63mm for PE,PPR,PP Welding
      Portable Butt Fusion Machine 20mm-63mm for PE,PPR,PP Welding

      "HAILI" fusion machine comes in handy in tight spaces due to its narrow profile
      Heater adapters are...

      DN 20-32mm Butt Fusion portable Welding Machine Equipment for PP,PPR,PE
      DN 20-32mm Butt Fusion portable Welding Machine Equipment for PP,PPR,PE

      Heater adapters are manufactured in accordance with ASTM F 1056 and are coated with stick-resistant ...

      // Our Pipe //

      New Pipe Products

      UPVC irrigation agricultural water pipe for Australia
      UPVC irrigation agricultural water pipe for Australia

      UPVC low pressure irrigation pipe have a long service life the anti-aging performance, the HAILI PVC...

      2  4 6  8  HDPE gas pipe specifications
      2 4 6 8 HDPE gas pipe specifications

      The general HDPE gas pipe specifications are 2" 4" 6" 8"..., let's talk about the characteristics an...

      PE butt fusion hydraulic welding machine for Brazil
      PE butt fusion hydraulic welding machine for Brazil

      The butt fusion operation is to heat the two pipe end faces to a certain temperature, and then apply...

      A级毛片免费观看在线网站,A级毛片免费全部播放,免费A级毛片无码免费视频120S
      1. <tbody id="qadtb"></tbody>
        <th id="qadtb"></th>

        1. <th id="qadtb"></th>

          <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>